GEC McMichael CED Videodisc player help please.
Does anyone know what belts I need for the loading and pickup mechs please?
I have some but they are a little tight. The arm plays ok but the loading is stiff... Thanks Courtney |
Re: GEC McMichael CED Videodisc player help please.
Is this a RCA or Hitachi clone?
|
Re: GEC McMichael CED Videodisc player help please.
I've seen the GEC brand on TV sets that had Hitachi parts inside, so it probably is a Hitachi underneath.
|
Re: GEC McMichael CED Videodisc player help please.
Sorry, it's the Hitachi 202 clone
|
Re: GEC McMichael CED Videodisc player help please.
|
Re: GEC McMichael CED Videodisc player help please.
Thanks Paul, I had been on that site loads but never found that chart...
I have ordered a couple of 1.2mm x 25mm belts which I think are the closest metric size equivalents. |
Re: GEC McMichael CED Videodisc player help please.
I ordered from CED Magic. The belt size was critical and a little too tight or a bit too loose and it didn't work. I sent my stylus off to them for inspection too. Very good company and communication.
|
All times are GMT +1. The time now is 3:52 am. |
Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.