Re: The Thanks Thread
 

Many thanks to Ed Dinning for the resistors great value and a wide range of values

Re: The Thanks Thread
 

Thanks to Peter for the Haigh (Matthews) Wobbulator & Timebase pcb that I received this morning.
David

Re: The Thanks Thread
 

Thank-you Pete for the 52 set booklet, something I’ve never seen before and very useful for restoration. Much appreciated!

Peter

Re: The Thanks Thread
 

Many thanks to Electronpusher0 (Peter) for the Haigh (Matthews) Wobbulator & Timebase PCB that safely arrived this morning. Looks good quality.

David

Re: The Thanks Thread
 

Many thanks and appreciation to Richard (Dickie) for sending me the Marconi TF966A info, it will help restore the one I've got.

Having a manual or even circuit diagram before you makes everything so much easier, so thanks again for sending it over.

Regards
PB

Re: The Thanks Thread
 

Many thanks to Aub for the DN360T Youview box. It works well, and the remote has also saved my DN372T from being scrapped. Much appreciated.

Re: The Thanks Thread
 

Many thanks to WME_Bill for sending over the info for Marconi TF1331, It'll help me clean-up & restore the one I've got, without sides & very mucky, sadly nearly all knobs stuck so its going to be a very slow job but has valves & both the TX's seem okay. So thanks again Bill.

Regards
Paul Bottrill

Re: The Thanks Thread
 

To Ed,

Many thank you's to you sir for the resistor 'goody bag'.

;)

Re: The Thanks Thread
 

To Whiskas,

Thanks for the portable B/W TV sale (#26), much appreciated sir,
Cheers.

Re: The Thanks Thread
 

Thanks to Guy (Nymrod121) for the USB caddy.

Re: The Thanks Thread
 

Thanks to vinylspinner for the Freeview box. It works well but confirmed that I can't get reliable Freeview reception here, and it only cost a few quid to find out.

Re: The Thanks Thread
 

Thanks to robinshack for the clearout transistors, great packaging.

Re: The Thanks Thread
 

Many thanks to Jerry, (Cathoderay57) for the AC/VP1 valve.

Re: The Thanks Thread
 

A big thank you to Andy (Diabolical Artificer) he really has helped me out with a B14A socket even removing the wires and cleaning pins of solder before sending. Its a perfect fit.

Way above the call of duty.
This is not the first time Andy has helped me out either.

Thanks Andy

Re: The Thanks Thread
 

I've known Andy for a while now and he's always been a gent.

Re: The Thanks Thread
 

Many thanks to Anthony for the HV transformer and caps, which get me even closer to building a very serious audio amplifier project.

Re: The Thanks Thread
 

A big thank you to Paul, our illustrious forum’s owner for the two hard drives that arrived safely to-day. They will allow me to revive a secondary PC damaged by the violent death of its PSU. The kind of generosity only found on this forum.

Peter

Re: The Thanks Thread
 

I'd like to say a big "thank you" to greg_simons for the fine Garrard 2025TC that arrived today, safe and sound. Now I need a project for it but first a respray to get rid of the dratted "Dust Bug" patch!

Re: The Thanks Thread
 

A big thank you to Greg (G.Castle) for the Sony Ericsson-compatible power supplier plus assorted adaptors which arrived safely today. Very well packed, too! :thumbsup:

Here are pics of it in action with my P800; I'll be attempting to revive the t39m a bit later.

Warmest wishes,
Guy

Re: The Thanks Thread
 

Thanks to robinshack for the ceramic rotary switches and IC regulators- a neighbour saw the delivery driver hurling the parcel over the high side gate despite the prominent "FRAGILE" label, but Rob's generous use of bubblewrap meant that everything was in fine fettle within.

Colin

Re: The Thanks Thread
 

Many thanks to Northyorks1 for the suitcase radio!
Very pleased .
Thank you.

Re: The Thanks Thread
 

Thank you to @robinshack for emailing over a Pye desktop microphone manual.

Restoration can now begin.

Re: The Thanks Thread
 

Many thanks due to Ken - Ambient Noise - for the Linsley-Hood Class A Amp and PSU and also to Nigel - Vinylspinner - for packaging and dispatching to me here in Wakefield.

Both gents an excellent representation of the generosity and spirit of this forum.

Very best wishes,

Martyn

Re: The Thanks Thread
 

Many thanks to Courtney Louise for the 5" tapes that safely arrived today, look forward to trying them out.

David

Re: The Thanks Thread
 

Thanks to Paul Stenning for careful packing and swift despatch of Dawn Of Television CD set.

Re: The Thanks Thread
 

Thanks very much to ScottishColin for kindly sending me the LED/LCD displays which will be useful for various logic circuit projects.

Regards,
Symon

Re: The Thanks Thread
 

Thanks to Bill (AC/HL) for the PATA HDs. They'll keep my reserve desktop system in a usable state for many years.

Re: The Thanks Thread
 

Many thanks to Clive (MurphyNut) for painstakingly restoring the Pye 47x scale and making the image available to us all.

https://www.vintage-radio.net/forum/...18&postcount=1

I printed it on the dye-sub machine at Tesco.

Attachment 275665

Attachment 275666

I've been after a 47x for two years, it was the radio that stood on our kitchen shelf when I was a toddler.

Re: The Thanks Thread
 

Glad it was of use to you, these charming little radios are quite scarce now, glad yours is looking a little better with the scale.

Re: The Thanks Thread
 

A big thank you to Majex45 for the LAN items. Good stuff sir, :)

Re: The Thanks Thread
 

My grateful thanks to "Woodchips" Bob for letting me have his Seetrax Ranger System 3 he no longer needs – I have made donations to the Salvation Army and the Lifeboats on his behalf for this!

(I was trying to get one of these for designing replacement vintage PCBs that the modern EDA systems aren't really suited for, because their libraries are predominantly surface–mount only! )

Chris Williams

Re: The Thanks Thread
 

Very many thanks to "DrStrangelove" for the SERT Journals.

Re: The Thanks Thread
 

Many thanks to Gabe001 who burned the midnight oil producing an LTSpice model of my stereo EL34 push-pull amp that enabled him to advise me on shelf filter component values that eliminated a VLF oscillation problem. Jerry

Re: The Thanks Thread
 

Many thanks to Restoration73 for sending the ITT service manuals. It's good to have these for my collection of service information.

Best regards,
Symon

Re: The Thanks Thread
 

Many thanks also to whiskas for sending me the mixed semiconductors. There are many useful parts. Half the fun is sorting them out. :)

Best regards,
Symon

Re: The Thanks Thread
 

A thank you to Rob (whiskas) for the Philips R2R knob set, the Philips R2R heads and the strap handle, arrived safely yesterday, all will come in useful.

David

Re: The Thanks Thread
 

Thanks a lot to all the friends to donated parts and components for me. They are very apretiated.
An spegial and big THANKS to me friend Andy (aka Diabolical Artificer) for sending this parcel to me. Bless you Andy

Re: The Thanks Thread
 

Thank you to Rob (Whiskas) for the tapes. Much appreciated.

Paul.

Re: The Thanks Thread
 

Thanks Rob (Whiskas) for the CD all good .

Re: The Thanks Thread
 

I'm deeply indebted to Collisr and G60NEDave for their unstinting help in supplying a manual and spares for my philips 2000 vcr series restoration, more of which later on..
Greg.

Re: The Thanks Thread
 

Another thank-you to Chris55000 for using his skills and battling health issues to design new regulator boards for my BRC 2000 project, i can dust off this beast and push though to a result with renewal enthusiasm now!.
Greg.

Re: The Thanks Thread
 

Thankyou to Rob (whiskas) for the Weller soldering iron + station plus spare iron and spare tips, that safely arrived yesterday.

As always was excellently packaged.

David

Re: The Thanks Thread
 

A big thankyou to Mike (Cobaltblue) for the Grundig TK 5 fast wind control shaft that arrived today, this will be used to replace my existing partly broken shaft, very generous of Mike to provide this FOC.

David

Re: The Thanks Thread
 

Many thanks to Dave (G60NEDave) for the isolation transformer/mains conditioner - especially for his careful and excellent packaging. This sort of generosity and care is what makes this forum so special!

Mike

Re: The Thanks Thread
 

Thank you to Mike (Cobaltblue) for the Grundig TK5 bits, including a serviceable head, and to Peter (dragonser) for the boxed Sony ICF-7600, which will afford hours of amusement!

Cheers, Gentlemen.

Re: The Thanks Thread
 

Seconded, same experience here. Thanks Dave!

Re: The Thanks Thread
 

A big thankyou again to Mike (Cobaltblue) for the Grundig TK 5 fast wind control knob that arrived today, this will be used to replace my existing partly broken knob on my TK 8, colour is different but that is fine, very generous again of Mike to provide this FOC.

David

Re: The Thanks Thread
 

Thanks to Bobdger for a nice and nicely packed copy of Tony Thompson's Vintage Radios.

Re: The Thanks Thread
 

Absolutely, the same goes for me. Thank-you Dave!

Peter

Re: The Thanks Thread
 

Just to say a big thank you to David G4EBT for suppling me with all the knobs for the Ekco A22 I am restoring he has reproduced them and what a super job he has made ,these were sent to me at no charge David even paid the postage a true gent indeed ! Mick.