GEC 4081A CRT Pinout?
Can anyone post pin out and data on a gec 4081?
Thanks |
Re: GEC 4081A CRT Pinout?
Hi,
GEC valve manual, part 1, Aug 1957, edition 2 states: 4081 and 4081A use a B9 base, with the following pinout: 1 = X1 2 = Y1 3 = A2 4 = H, K 5 = H 6 = G 7 = A1,3 8 = Y2 9 = X2 The indexing pip is between pins 4 & 5. Looks like an oscilloscope tube, with a screen diameter of 2.75", green phosphor, 4V @ 0.8V heater, 80 - 200V A1 volts, 400 - 800 A3 volts, -30V max G1 cut-off (max), deflection sensitivity (mm/V) X = 150/VA2; Y = 150/VA2. Hope this helps. Regards, Dazzlevision |
All times are GMT +1. The time now is 1:06 pm. |
Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.