UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Other Discussions > Forum Announcements and Comments

Notices

Forum Announcements and Comments Announcements about forum changes will be made in this section. All new threads here now require moderator approval.

Closed Thread
 
Thread Tools
Old 24th Feb 2017, 12:54 am   #1
Grubhead
Heptode
 
Join Date: Dec 2016
Location: Sheffield, South Yorkshire, UK.
Posts: 539
Default Splitting TV and Video

I am just wondering if you have considered splitting the TV and Video section into two?
I do realise that it might not be possible to do, due to the forum software. And of course it would require the threads to be moved to the different sections if you did split it. Which would be a big task.

But I do think it would benefit it. Since like many people I wouldn't touch a TV with a 25KV EHT. So wading through threads on old TV's, especially when you can't be certain if the thread is about a video or TV, is a small pain

Most video problems too tend to be mechanical problems which is often more interesting than TV faults. But TV buffs also might like their own section.
It might even encourage new people to join. You never know
Grubhead is offline  
Old 24th Feb 2017, 8:15 pm   #2
Tazman1966
Nonode
 
Tazman1966's Avatar
 
Join Date: May 2006
Location: St Albans, Herts, UK.
Posts: 2,193
Default Re: Splitting TV and Video

It's a thought. It would take the mods a lot of time to separate it all but once it is done, it should look after itself.

I like the idea...
__________________
All the very best,
Tas
Tazman1966 is offline  
Closed Thread

Thread Tools



All times are GMT +1. The time now is 6:20 pm.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.