|
Vintage Test Gear and Workshop Equipment For discussions about vintage test gear and workshop equipment such as coil winders. |
|
Thread Tools |
15th Feb 2017, 12:56 am | #1 |
Retired Dormant Member
Join Date: Feb 2014
Location: Rome, Italy.
Posts: 10
|
Gould OS255
Hi everyone.
I bought an oscilloscope gould os255 type, but i believe that it has some problem. The first thing that i viewed is that the trace moves in position gnd, moving the voltage/division selector. Other thing, i not succeed to stop the signal on video also moving the selector of the time in any position. To read the frequency is impossible. Furthermore the second trace is dead. I not see it on video in any position of selector channel. Anybody can give me some suggest for solve these problems. If necessary i can post some pictures Thanks everyone |