|
Success Stories If you have successfully repaired or restored a piece of equipment, why not write up what you did and post details here. Particularly if it was interesting, unusual or challenging. PLEASE DO NOT POST REQUESTS FOR HELP HERE! |
|
Thread Tools |
12th Oct 2016, 10:45 pm | #1 |
Heptode
Join Date: May 2015
Location: Reading, Berkshire, UK.
Posts: 692
|
Bush SRP31D logo replacement
Following a request in the want ads kind member Alex sent me a scan of the badge for the SRP 31D.
I printed it off then laminated it and here is the finished item, looks the part very pleased with it. |
12th Oct 2016, 11:06 pm | #2 |
Hexode
Join Date: Mar 2012
Location: East Yorkshire, UK.
Posts: 354
|
Re: Bush SRP31D ogo replacement
It does seem to be a problem with these players that the logo is often missing.
Looks a very neat job, well done!
__________________
Howard |
13th Oct 2016, 12:45 am | #3 |
Dekatron
Join Date: Nov 2009
Location: Lincolnshire, UK.
Posts: 5,000
|
Re: Bush SRP31D logo replacement
Yes, I've got one of these in at the moment with the logo missing, so I could certainly use a scan like that to make a replacement.
An original one is not the sort of thing that I'd put in a request for in the 'wanted' section as I realise that it's an item that's often asked for as they're nearly always missing. The folk that ask obviously never get offered one as there's no spares - a bit like that speed change knob on that BSR record changer. If I did get offered an original one, then it would be a bit like pushing in front of everyone else that's already asked. |
12th Dec 2016, 4:03 pm | #4 |
Retired Dormant Member
Join Date: Dec 2016
Location: Liverpool, Merseyside, UK.
Posts: 16
|
Re: Bush SRP31D logo replacement
Looks good! Thanks for sharing. I won't post a wanted ad up now that I know no one has them!
I have one on mine but it's a little shattered. I might just stick with it. |