UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > General Vintage Technology > Success Stories

Notices

Success Stories If you have successfully repaired or restored a piece of equipment, why not write up what you did and post details here. Particularly if it was interesting, unusual or challenging. PLEASE DO NOT POST REQUESTS FOR HELP HERE!

Closed Thread
 
Thread Tools
Old 12th Oct 2016, 10:45 pm   #1
leslie5555
Heptode
 
Join Date: May 2015
Location: Reading, Berkshire, UK.
Posts: 692
Default Bush SRP31D logo replacement

Following a request in the want ads kind member Alex sent me a scan of the badge for the SRP 31D.
I printed it off then laminated it and here is the finished item,
looks the part very pleased with it.
Attached Thumbnails
Click image for larger version

Name:	001.jpg
Views:	250
Size:	83.5 KB
ID:	131214   Click image for larger version

Name:	002.jpg
Views:	262
Size:	102.1 KB
ID:	131215  
leslie5555 is offline  
Old 12th Oct 2016, 11:06 pm   #2
Half a Mullard
Hexode
 
Join Date: Mar 2012
Location: East Yorkshire, UK.
Posts: 346
Default Re: Bush SRP31D ogo replacement

It does seem to be a problem with these players that the logo is often missing.

Looks a very neat job, well done!
__________________
Howard
Half a Mullard is offline  
Old 13th Oct 2016, 12:45 am   #3
Techman
Dekatron
 
Techman's Avatar
 
Join Date: Nov 2009
Location: Lincolnshire, UK.
Posts: 4,973
Default Re: Bush SRP31D logo replacement

Yes, I've got one of these in at the moment with the logo missing, so I could certainly use a scan like that to make a replacement.

An original one is not the sort of thing that I'd put in a request for in the 'wanted' section as I realise that it's an item that's often asked for as they're nearly always missing. The folk that ask obviously never get offered one as there's no spares - a bit like that speed change knob on that BSR record changer. If I did get offered an original one, then it would be a bit like pushing in front of everyone else that's already asked.
Techman is offline  
Old 12th Dec 2016, 4:03 pm   #4
Mikejt90
Retired Dormant Member
 
Join Date: Dec 2016
Location: Liverpool, Merseyside, UK.
Posts: 16
Default Re: Bush SRP31D logo replacement

Looks good! Thanks for sharing. I won't post a wanted ad up now that I know no one has them!

I have one on mine but it's a little shattered. I might just stick with it.
Mikejt90 is offline  
Closed Thread

Thread Tools



All times are GMT +1. The time now is 5:01 am.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.