Re: Linear Conchord/RSC A11 30 watt amp
Thanks lads, Ed, I've got a mains tx that will put 450 or so on the anodes, the 807 will take a high voltage. What I need most of all, is the biasing arrangement using a standard type mains tx, ie 450-0-450 6.3 5.0, I'm aware that the concord used a standard tx but the centre tap was lifted from ground to give the bias for the 807. Terry, if you could send me the schematic for that amp I would appreciate it, I can pm you with contact details. Many thanks.
Bill
|